Zimmer Biomet Sesamoid Plasty V2 Скачать руководство пользователя страница 19 | Manualshive

Страница: 19 / 24

Zimmer Biomet Sesamoid Plasty V2 Скачать руководство пользователя страница 19

17 |

Sesamoid

®

Plasty

User Guide

Technical Specifications

(cont.)

Product Regulatory Notices

(cont.)

FCC Notice

This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
part 15 of the FCC Rules.

These limits are designed to provide reasonable
protection against harmful interference in a
residential installation. This equipment generates,
uses and can radiate radio frequency energy and,
if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation.

If this equipment does cause harmful interference
to radio or television reception, which can be
determined by turning the equipment off and on, the
user is encouraged to try to correct the interference
by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment

and receiver.

• Connect the equipment into an outlet on a

circuit different from that to which the receiver is
connected.

• Consult the dealer or an experienced radio/TV

technician for help.

«
...
17
18
19
20
21
...
»

Содержание Sesamoid Plasty V2

























Отзывы:

Нет отзывов