Zimmer Biomet Sesamoid Plasty V2, Руководство пользователя, Страница: 13 / 24

11 |
Sesamoid
®
Plasty
User Guide
Disassembly of the Sesamoid Plasty
The steps to fold down the Sesamoid Plasty (shown in
Figure 9) are:
a. Remove the Sesamoid Plasty Computer from the
stand.
b. Remove the Sesamoid Plasty Camera and the camera
arm from the stand.
• To remove the camera from the arm, press and hold
the button on the Manfrotto Connector located
on the camera arm (Figure 9) and slide the camera
connecting device out from the bottom to the top
of the camera arm connector.
c. Undo successively the top, middle and bottom stand
locking mechanisms.
d. Fold the stand towards the floor holding the
previously folded segments to prevent them from
swinging unexpectedly.
CAUTION:
Remove the Sesamoid Plasty Camera and
the Sesamoid Plasty Computer prior to undoing any
of the locking mechanisms to fold the stand. Failure to
follow these instructions will result in an unexpected
tilt of the Sesamoid Plasty Stand.
CAUTION: The Sesamoid Plasty must never be
submerged in water or exposed to high levels of
humidity.
CAUTION:
Do not leave the equipment in an
uncontrolled environment where the storage
temperature is below –20˚ C or above 50˚ C. This may
damage the equipment.
CAUTION:
The Sesamoid Plasty must be kept away
from conditions of extreme heat or cold.
Transportation and Storage
(cont.)
Disassembly of the Sesamoid Plasty Stand
a
b
c
d
Figure 9