background image

Z16FMC Series Motor Control Development Kit

Quick Start Guide

QS007901-1110

Page 15 of 15

DO NOT USE IN LIFE SUPPORT

LIFE SUPPORT POLICY

ZILOG'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPO-
NENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS 
PRIOR WRITTEN APPROVAL OF THE PRESIDENT AND GENERAL COUNSEL OF 
ZILOG CORPORATION. 

As used herein

Life support devices or systems are devices which (a) are intended for surgical implant 
into the body, or (b) support or sustain life and whose failure to perform when properly 
used in accordance with instructions for use provided in the labeling can be reasonably 
expected to result in a significant injury to the user. A critical component is any compo-
nent in a life support device or system whose failure to perform can be reasonably 
expected to cause the failure of the life support device or system or to affect its safety or 
effectiveness.

Document Disclaimer

©2010 Zilog, Inc. All rights reserved. Information in this publication concerning the 
devices, applications, or technology described is intended to suggest possible uses and 
may be superseded. ZILOG, INC. DOES NOT ASSUME LIABILITY FOR OR PRO-
VIDE A REPRESENTATION OF ACCURACY OF THE INFORMATION, DEVICES, 
OR TECHNOLOGY DESCRIBED IN THIS DOCUMENT. ZILOG ALSO DOES NOT 
ASSUME LIABILITY FOR INTELLECTUAL PROPERTY INFRINGEMENT 
RELATED IN ANY MANNER TO USE OF INFORMATION, DEVICES, OR TECH-
NOLOGY DESCRIBED HEREIN OR OTHERWISE. The information contained within 
this document has been verified according to the general principles of electrical and 
mechanical engineering.
Z8, ZNEO and Z16FMC are trademarks or registered trademarks of Zilog, Inc. All other 
product or service names are the property of their respective owners. 

Warning:

Содержание Z16FMC Series
















Отзывы: