Zilan ZLN 7856, Руководство пользователя

Страница: 3 / 43

18. Accessories shall include instructions for their safe use.
19. It shall warn of potential injury from misuse.
20. This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless
they have been give supervision or instruction concerning use of the appliance by a
person responsible for their safety.
21. Children should be supervised to ensure that they do not play with the appliance.
22. If the appliance is locked, please press Reversal button(REV). The meat locked in cutter
housing is untrodden, so the appliance can renew its usual condition.
INSTRUCTION FOR USE
Assembling
1. Press the fasten button
，
hold the head and insert it into the inlet when inserting please
pay attention the head must be slanted
as per arrow indicated on the top, see
(fig.1), then move the head
anticlockwise so that the head being
fastened tightly. (fig.2)
2. Place the snake into the head, long end
first, and turn to feed the screw slightly
until it is set into the motor housing
(fig.3).
3. Place the cutting blade onto the snake
shaft with the blade facing the front as
illustrated (fig.4).If it is not fitted properly,
meat will not be grinded.
4. Place the desired cutting plate next to
the cutting blade, fitting protrusions in
the slot (fig.5).
5. Support or press the center of the
cutting plate with one finger then screw
the fixing ring tight with another hand
(fig.6). Do not over tighten.
6. Place the hopper plate on the head and
fix it into position.
7. Locate the unit on a firm place.
8. The air passage at the bottom and the side of the motor housing should be kept free
and not blocked.