17
Chart 2: under MMA mode, preset current
Chart 3: under MMA mode preset current
display with VRD enabled
display VRD disabled
c)
multifunctional data display
shows the preset current
“080A”, its unit is ampere(A).
d) Adjusting the
Multifunctional data adjusting knob can change the welding current during
welding process, and displayed in
multifunctional data display
. The welding current
range is 10A-300A.
e) 3 seconds later after setting the welding parameters, the
multifunctional data display
would flashes for one time, which means the data has been saved.
f)
The panel displays as Chart 4 when perform welding, which means the welding voltage is
23.2V, and the preset current 80A. 5 seconds later, it returns to the preset current state.
Chart4: The display status when welding under MMA mode.
Operation instruction under MIG mode.
a) When welding stops, press
MMA/MIG switch key
MIG indicator lights up, and the
machine enters into MIG mode.(Chart 5)
b)
multifunctional data display
shows the preset voltage
“18.0V”, its unit is volt(V). while
“05.0m/min means the preset wire feeding speed, its unit is m/min”
