ZGR SOLAR STR 250
Operation manual
www.zigor.com
27
Fig. 4-30 AC waterproof connector
4)
Strip the protection layer and insulation layer by specific length, as described in the figure below (Fig.
4-31).
Fig. 4-31 Strip the protection layer
5)
Make the cable and crimp terminal (Fig. 4-32).
Fig. 4-32 Cable and crimp
6)
Secure the wires to corresponding terminals (Fig. 4-33).
NOTICE
Note the terminal positions of PE wire and N wire. If a phase wire is connected to the PE terminal or N terminal,
unrecoverable damage may be caused to the inverter.
