ZGR SOLAR STR 250
Operation manual
www.zigor.com
19
Fig. 4-16 Level the assembled mounting-bracket and mark the positions for drilling holes
3)
Insert the expansion bolts into the holes and secure them with a rubber hammer. Fasten the nut with a
wrench to expand the bolt. Remove the nut, spring washer, and
ü
at washer, and store them properly (Fig.
Fig. 4-17 Insert the expansion bolts
4)
Fix the mounting-bracket with the expansion bolts (Fig. 4-18 and Table 4-3).
Fig. 4-18 Fix the mounting-bracket
ITEM DESIGNATION
DESCRIPTION
A
Wall
-
B
Expansion bolt
Fastening the bolt in the sequence of nut, spring washer, slat washer
C
Mounting bracket -
Table 4-6 Fix the mounting-bracket
5)
Take out the inverter from the packing case.
6)
Hoist the inverter to the installation position when necessary (refer to 4.3.2). If the installation position is
not high enough, skip performing this step.
7)
Hang the inverter to the mounting-bracket and ensure that the mounting ears perfectly engage with the
mounting-bracket (Fig. 4-13).
