
33 of 57
HXL-8844Plus HDMI Matrix Switch User Manual
UM-004-0001-000-01 |
August 29, 2020
© 2020 Zigen Corporation
www.zigencorp.com
H
X
L
-P
lu
s
U
se
r
M
a
nu
al
Device Information
Serial:
Indicates the unit serial number.
Firmware Revision:
Indicates the current firmware of the unit.
Firmware Date:
Indicates the build date of the installed firmware.
Hardware Revision:
Indicates the current hardware revision of the device.
IP Address:
Indicates the current IP Address of the unit. This can be changed below by the user.
MAC Address:
Indicates the MAC address of the hardware.
Note:
The MAC address of the unit is unique and cannot be changed.
Network Settings
Hostname:
Type desired host name and press Update Name. The source name could be device type or
location.
IP Address, Static Netmask, Static Gateway, and IP Mode:
Enter the IP Address, Netmask, and Gateway
fields if IP Mode is set for Static. If DHCP is selected, then the network settings will be automatically
configured by the DHCP Server. If DHCP is selected but no DHCP Server is found, the HXL-Plus will
automatically assign network configuration using Auto-IP. Click Update Network upon completion.
Note
: DHCP is the default network configuration. Use the ZigNet-Locator
application to determine the IP Address of the HXL-Plus if DHCP mode is used. The
IP Address can also be determined using the local display and menu buttons located
on the front panel.
Firmware Settings
Update:
If the HXL-Plus is connected to the Internet through its Ethernet port, the unit will be able to
determine if there is a new firmware version available. If “Update available” is indicated, press the
Update button and wait for the unit to complete the programming process.
ZigNet Settings