13 of 57
HXL-8844Plus HDMI Matrix Switch User Manual
UM-004-0001-000-01 |
August 29, 2020
© 2020 Zigen Corporation
www.zigencorp.com
H
X
L
-P
lu
s
U
se
r
M
a
nu
al
4
Using the Front Panel
The HXL-Plus devices can be locally controlled using the front panel buttons. Refer to section
Front Panel
for a complete description of the buttons.
Configuring the Video Matrix Switch
This process will map or connect an HDMI video output(s) to a specific HDMI video input. If the VIDEO
button is not already illuminated blue, press the VIDEO button. Next press one of the INPUT buttons
and it will illuminate to confirm the button press. Any one of the output buttons will illuminate if it is
currently mapped to the selected input. Press the desired OUTPUT button to connect it with the selected
Input. The Input/Output buttons will flash momentarily to confirm the new mapping. If the ALL button
is pressed, then all the HDMI video outputs will be mapped to the selected input.
Example Front Panel Button sequence.
1.)
Connecting an HDMI Input to an HDMI Output
a.
Example:
Input 1 to Output 4
Press VIDEO, INPUTS 1, OUTPUTS 4
b.
Example:
Input 2 to all Outputs
Press VIDEO, INPUTS 2, ALL
Configuring the Analog Audio Matrix Switch
This process will map or connect an Analog Audio RCA output(s) to a specific extracted HDMI audio input.
If the AUDIO button is not already illuminated blue or red, press the AUDIO button. The table below
shows which set of Analog Audio outputs are being mapped depending on the color of the AUDIO button:
AUDIO Button LED Color
Analog Audio RCA Output
Blue
1-8 (HXL-88Plus) | 1-4 (HXL-44Plus)
Red
9-12 (HXL-88Plus) | 5-8 (HXL-44Plus)
Next press one of the INPUT buttons and it will illuminate to confirm the button press. Any one of the
output buttons will illuminate if it is currently mapped to the selected input. Press the desired OUTPUT
button to connect it with the selected Input. The Input/Output buttons will flash momentarily to confirm
the new mapping. If the ALL button is pressed, then all the Analog Audio outputs will be mapped to the
selected input.
Example Front Panel Button sequence.
1.)
Connecting an HDMI Input extracted audio to an Analog Audio Output
a.
Example:
Input 1 to Output 4
Press AUDIO (until blue), INPUTS 1, OUTPUTS 4
b.
Example:
Input 2 to Output 9
(HXL-88Plus)
Press AUDIO (until red), INPUTS 2, OUTPUTS 1
Using the Front Panel