22
LED indicator
The LED indicator gives the following information:
Heating / Hot water
indicator
What it means
Steady green light
Heating/Hot water is ON
Flashing in green
1 minute time delay for boiler protection if you
switch on/off heating or hot water very quickly.
OFF
Heating/Hot water is OFF
Hot water indicator
flashes red once
Hot water has been disabled
Receiver status
What it means
Flashing in green
Searching Thermostat for 2 minutes
Steady green light
Connected with Thermostat
Flashing in red
No Thermostat is found, stop searching
Steady red light
Disconnected with Thermostat
Reset:
Hold heating button for 10 seconds until receiver's status light flashes red.
After reset, the receiver will search Thermostat automatically.
Activate pairing:
Hold heating button for 5 seconds until receiver's status light flashes green
to start searching Thermostat.
Note:
When you close the thermostat and receiver together, they will
automatically bind to each other, even if they are separated.
