16
Step 4. Connect the wires
Connect the power cables L (or P) / N on the boiler or junction box to the L
(live) and N (neutral) terminals on Receiver to to power the Receiver.
Connect the heating control circuit to Recevier 4, 5, 6 as needed.
If your system has a hot water control circuit, connect it to 1, 2, 3 as needed.
Step 3. Mount the receiver
Pass the cables through the Receiver from the bootom or rear and mount
the backplate to the wall using screws and plugs provided(Use the Trim
Plate behind it to hide hole if needed).
Step 5. Installing thermostat
After the wiring is completed, close the terminal block flap back to Receiver
and return to the previous installation chapter to continue the installation
of the thermostat.
L N
1 2 3 4 5 6
GND
+12V
