TR1200IP
12390-0706-05
Page
13 / 23
www.ziehl.de
•
Press Down key
Display
8
tcP.
8
(TCP configuration)
•
Press the Set key
Display
8
htt
8
/
8
ful
8
(http port / full access) flash alternately
•
Configure the http port with the Up and Down keys
•
Press the Set key
Display
8
mod
8
/
8
on
8
(Modbus / on) flash alternately
•
Turn the modbus protocol on /off using the Up and Down keys
•
Press the Set key
Display
8
tcp.
8
(TCP configuration)
Note:
Note:
The UDP port always applies for the transmission of Sensors 1…6.
Sensors 7...12 are transmitted via the set UDP port +1.
10.11
Simulation
A sensor can be selected and a temperature simulated here. All device functions operate as if this value is
actually being measured. Error messages are only indicated with the LEDs and not in the display.
The set values are simulated until the menu item
8
si .
8
is left with the Up or Down button.
If no key is pressed for 15 minutes, the device automatically switches back to the display mode.
Adjustment process:
•
Select the menu item with the Up/Down key until…
Display
8
si .
8
(Simulation)
•
Press the Set key
Display
8
si
8
/
8
S 1
8
(Simulation / Sensor) flash alternately
•
Use the Up and Down keys to select the sensor function
•
Press the Set key
Display
8
0
8
(Temperature)
•
Simulate the desired temperature using the Up and Down keys
•
Press the Set key
Display
8
si .
8
(Simulation)
By pressing the Set button repeatedly all sensors can be selected in succession. The simulated
values are retained until the menu item
8
si .
8
is left by pressing Up or Down.
