(Date / Name): 16.04.2009 Sc
Drawing no.: 12280-0701-00
Page 7 of 24
Name: TR 800 WEB
ZIEHL industrie-elektronik GmbH + Co KG, Daimlerstr.13, D-74523 Schwäbisch Hall, Tel.: +49 791 504-0, Fax: -56, email: [email protected]
8. Start-up operation (commissioning)
8.1 General instructions on operating
One can identify the device operating mode with the decimal point behind the last 7-segment
display.
8.2 Display mode
Decimal point off (normal state for measurement display)
Displays the current sensor value (related yellow sensor LED
illuminated, change to next sensor by pressing Set -> button)
LED yellow
RS485 Rx / Tx
Flashes during data communication via RS485 interface
LED yellow
Day / Night
ON = Limits for "Night" are active
OFF = Limits for "Day" are active
LED yellow
Relay K1 .. K4
ON = Relay operating
OFF = Relay is released
LED red
Alarm 1 .. 4
Flashes 1:4 = Response delay is active
Flashes 4:1 = switch-back delay is active
Flashes 1:1 = Ready for switch back, reset with press
"SET/RESET" button
≥
2s or close ext. Reset Y1/Y2
On = Alarm on
OFF = Alarm off
LED yellow
Sensor 1 .. 8
ON = Measurement of selected sensors in the display.
Flashes = Error in sensor circuit
LED red
Sensor error
On = Fault in a sensor circuit
(Defective, yellow sensor LED flashes)
Function key
Set/Reset
Press briefly: Displays the next sensor (sensor LED illuminates)
Press for 10 s: displays the software version
Function keys
Up and Down
Press briefly: Change into the menus mode
8.3 Menu mode
Decimal point on
Select the menu items to view the parameters
Function keys
Up and Down
Press briefly: Select menu item; change into the display mode
Function keys
Set/Reset
Press briefly: Change into the configuration mode
8.4 Info mode
Decimal point flashes
Function keys
Up and Down
Not in use
Function keys
Set/Reset
Select next parameter; after the last parameter change into
menu mode