(Date / Name): 16.04.2009 Sc
Drawing no.: 12280-0701-00
Page 4 of 24
Name: TR 800 WEB
ZIEHL industrie-elektronik GmbH + Co KG, Daimlerstr.13, D-74523 Schwäbisch Hall, Tel.: +49 791 504-0, Fax: -56, email: [email protected]
4. Display and controls
1, 2 LEDs (yellow) RS485 interface
•
Rx flashes briefly:
Unit is receiving data via the RS485 interface
•
Tx flashes briefly:
Unit is transmitting data via the RS485 interface
•
Rx and Tx flash/illuminate during firmware update
3
LED (red) Sensor error
•
Illuminated:
Fault in a sensor circuit
4
LEDs (red) alarm
•
Illuminated:
Alarm (1-4) has occurred
•
Flashes briefly (1:4):
Response delay is running
•
Flashes long (4:1):
Backshift delay is running
•
Flashes uniformly (1:1): Ready for reset, reset with key
Press "SET/RESET"
≥
2s or ext. Reset Y1/Y2
5
LED (yellow) Night
•
Illuminated:
Limits for "Night" (can be set via browser) are active
6
LEDs (yellow) sensors
•
Illuminated:
Displays the sensor value belonging to the LED in the
digital display
•
Flashes:
Sensor error in the corresponding sensor circuit
7
LEDs (yellow) relay state
•
Illuminated:
The relay belonging to the LED is picked up
•
Off:
The relay belonging to the LED is released
8
Digital display (4 digits)
•
Display of sensor value
•
Display of error codes
•
Display of menu and configuration mode
9,10 Up button / Down button
•
Change into the menu mode (see Operating instructions Point 8.3)
11
Set/Reset button
•
Press briefly:
Displays the next sensor (sensor LED illuminates)
•
Press for 10 s:
Displays the software version (e.g.
0
0
0
0-
-
-
-00
00
00
00)
12
LED (yellow) Displays Ethernet transmission speed
•
Off: 10 Mbps
On: 100 Mbps
13
LED (green) Displays Ethernet data traffic
•
Flashes during active data transmission
14
IP address slide switch
•
Towards Ethernet jack:
IP address 10.10.10.10
•
Towards reset button:
IP address User (set via webbrowser)
15
Webserver reset button
•
Internal webserver restarts when pressed (duration ca. 1 minute)
