SW32V
11820-0701-01
Page
18 / 22
www.ziehl.de
Adjustment process:
•
Select the menu item with the Up/Down key until…
Display
8
si
8
(Simulation)
•
Press the Set key
•
A voltage value can be simulated with the Up and Down keys (voltage = most recently
set value)
•
Press the Set key (exits the configuration mode)
Display
8
si
8
(Simulation)
After exiting the Simulation menu item with the Up/Down keys, the unit switches over to monitoring the
limits.
If no key is pressed for 15 minutes, the device automatically switches back to the display mode.
Code lock
Here, the set parameters can be protected by activating a code lock.
The device acknowledges an incorrect entry with
8
err
8
(flashes three times).
Adjustment process:
•
Select the menu item with the Up/Down key until…
Display
8
Cod.
8
(Code lock)
•
Press the Set key
Display
8
Pin
8
/
8
0
8
(Pin / Pin code) flash alternately
•
Use the Up and Down keys to set the
saved
pin code (
factory setting is
8
504
8
)
•
Press the Set key
•
Set the desired code lock using the Up and Down keys:
o
8
off.
8
off, all parameters can be changed
o
8
On
8
on, no parameters can be changed
•
Press the Set key
Display
8
Pin
8
/
8
504
8
(Pin / Pin code) flash alternately
•
Set the desired new pin code with the Up and Down keys
(caution: write down the pin code)
•
Press the Set key
Code lock on, display
8
on
8
flashes three times
Code lock off, display
8
off
8
flashes three times
Return to menu mode, menu item code lock
If there are any problems with the code lock (pin forgotten), the lock can be switched off and the pin can be
reset to 504 by keeping the Set key pressed while switching on the mains until
8
Cod
8
/
8
off
8
appears in
the display.
