Information
Important additional information and advice for user.
2.2
Requirements placed on the personnel / due diligence
Danger!
"
Installation, connection to the power supply and commissioning may only be performed by quali
fi
ed
service personnel! The relevant regulations must be observed!
"
Persons entrusted with the planning, installation, commissioning and maintenance and servicing in
connection with the elevator machine must have the corresponding quali
fi
cations and skills for
these jobs. Based on their training, knowledge and experience as well as knowledge of the relevant
standards, they must be able to judge the work transferred to them and be able to recognize
possible hazards.
"
In addition, they must be knowledgeable about the safety regulations, EU directives, rules for the
prevention of accidents and the corresponding national as well as regional and in-house
regulations. Personnel undergoing training, instruction, or on apprenticeship may only work on the
elevator machine under the supervision of an experienced person. This also applies to personnel in
general training.
"
Comply with the legal minimum age.
2.3
General safety instructions
Danger!
"
The elevator machine has attachment points: integrally cast eyelets or screwed-on eye bolts, eye
plates or steel cable loops. The attachment points are designed exclusively for transporting the
elevator machine including brake and traction sheave. Do not lift other loads such as bolted on
components, ropes lying on top, etc. with the attachment points. Suitable lifting gear must be used.
Attention!
Warning of hand injuries!
"
Risk of injury from reaching into the rope guard.
"
Do not carry out any activities during operation.
"
Only perform maintenance work on the drive when stopped.
"
If the elevator machine is not energised, no electric torque is available. Releasing the brakes can
cause uncontrolled acceleration of the elevator!
Service instructions
ZAS0, ZAS1, ZAS2, ZAS3
Safety instructions
A-TIA19_07-GB 1936 Index 001
Part.-No. 01013457-GB
4/12
