3.3.3
Lifting with forced ventilation
Figure 3-3-3-01 - Length of the sling chains
Figure 3-3-3-02 -
Positioning the sling chain 4-strand
3.3.4
Checking the transport width
If the drive is too wide and does not
fi
t through the machine room door, the brakes on the right and left
can be removed.
Dismantle the brake, see chapter 8.3.1 Replacing the brake.
width
With mounted brakes
1108 mm
Brake on right or left removed
986,5 mm
Bremse rechts und links demontiert
865 mm
Table 5-3-4
3.4
Storage
"
"
Store the elevator machine in the original packaging in a dry area protected from the weather or
protect it from dirt and weather until
fi
nal mounting.
"
"
Leave the VCI paper on the grooved surface of the traction sheave as corrosion protection until the
elevator machine is installed.
"
"
Extreme heat or cold (storage temperature -20
°
C to +60
°
C) must be avoided!
"
"
High humidity which can lead to condensation must be avoided.
"
"
Avoid aggressive conditions (for example salt spray)!
"
"
Maximum storage duration: 12 months
- Release brake
- Turn motor shaft manually
- Listen for unusual bearing noises
If the maximum storage duration is exceeded, the following procedure must be carried out after 12
months at 2-3 month intervals to prevent damage to the bearings:
- Release brake
- Turn motor shaft manually at least 3 turns in both directions to ensure even distribution of the
bearing grease
If you encounter any irregularities, please contact ZIEHL-ABEGG-SE customer service.
3.5
Disposal / Recycling
Disposal must be carried out professionally and environmentally friendly in accordance with the legal
stipulations.
Original operating instructions
ZAtop
–
model series SM315.100A
Product overview
A-TBA22_02-GB 2022/50 Index 002 Part.-No. 01013486-GB (EU-BD 1075)
11/76
