Operating Instructions Z-D-15/35/55E-..
Safety precautions
__________________________________________________________
_________________________________________________________________________________
L-BAL-E321-GB 2021/11 Index 002
9/44
STOP
Stop!
Undisturbed and safe operation of the filter module is possible only if the hints of this instruction are
observed
.
If they are not observed, in some cases malfunctions and damages may occur:
-
Observe specified mains voltage.
-
Power and control cables must be installed with distance (> 15cm)
-
Use screened / twisted control wires. Connect screen to PE at both ends!
-
Ensure good grounding of drive, motor and filter module. Connect the screen of power cables
to ground extensive at both ends.(remove lacquer)!
-
Observe star layout for grounding of cabinets and systems (AVOID ground loops!)
-
The filter
module is designed for
fixed
mounting and electrical connection.
The ground wire must have a minimum cross section of 2,5mm² (depending of filter module
size).
