Operating Instructions Z-D-15/35/55E-..
Supervision- and control software
__________________________________________________________
_________________________________________________________________________________
L-BAL-E321-GB 2021/11 Index 002
36/44
6.2.5
Data
The “Data” pages show electrical values of the system. Based on the data from the “Home” page, also
Voltage vs time and current vs. time are displayed.
6.2.6
Procedure to power on
1. Connect the Z-D-15/35/55E-.. with the PC
2. Adjust current transformer ratio, compensation rate, grid voltage, grid frequency etc. on pages „User
Set”
3. Check that on page „Record” no errors or alarms are displayed. If there are, first clear the messages
on page „Home“ by using „Clear Fault“ button.
4. Click at „Power on” on page „Home“.
