Load data:
Maximum permissible static operating shaft load
F
R
58.9 kN
Distance from bearing A to centre traction sheave
a
75 mm
Rated torque
T
r
1120 Nm
Maximum torque
T
max
2400 Nm
Magnetic force
F
Mag
3434 N
Nominal brake torque
T
Br
2400 Nm
(2 x 1200 Nm)
Maximum brake torque
2 x T
Br
4800 Nm
Rated speed
n
r
400 rpm
Examination result:
For the examination a calculation of traction sheave shaft including shaft-hub-connections was carried
out by IFF ENGINEERING & CONSULTING GmbH. The result was that the traction sheave and the
shaft-hub-connections were designed according to the maximum load data.
An installation free of stresses and an unmovable mounting of the bearings in each direction is
presupposed. The machine frame and the points of force introduction have to be designed regarding
construction and strength appropriate to the forces imposed on the bearings.
It should be noted that on the brake side only braking torque is applicable, because the calculation
does not take into account the additional transverse forces due to the braking e
ff
ect on the traction
sheave shaft.
K
ü
nzelsau, 24.04.2018
(Location, date of issue)
ZIEHL-ABEGG SE
Roland Hoppenstedt
Technical Director Drive Technology
(name, function)
ZIEHL-ABEGG SE
André Lagies
Head of mechanical development drive technology
(name, function)
(signature)
(signature)
Translation of the original operating instructions
ZAtop SM250.45B
Enclosure
A-TBA17_04-GB 2023/28 Index 004 Part.-No. 01013409-GB (EU-BD 760/1)
81/84