ZIEHL-ABEGG Icontrol FXDM, Руководство по эксплуатации, Страница: 36 / 108

Setting direct
Setting direct (at Number steps: 0
“
Base setup
”
)
If the setting is to be made during operation directly with the ▼ + ▲ keys, no setting is
necessary here ( setting in operation 1.02 ).
Setting range: Min. Speed - Max. Speed
Factory setting: 50.0 Hz (
Max. Speed)
Setting Step
Setting step
(at Number steps: 1 - 5
“
Base setup
”
)
If the setting is to be made during operation directly with the ▼ + ▲ keys, no setting is
necessary here ( setting in operation 1.02 ).
Setting range: 0 - setting nummber steps
Factory setting: 0
When setting a
“
Minimal speed
”
>
|
OFF
|
the output is not switched o ff in step
“
0
”
!
Min. Speed
Min. Speed (basic speed only when needed)
Setting range:
|
OFF
|
→
“
Shutdown Freq.
”
( Motor Setup) -
“
Max. Speed
”
.
Factory setting:
|
OFF
|
Max. Speed
Max. Speed (speed limitation only when needed)
Setting range:
“
Max. Frequency
”
( Motor Setup) -
“
Min. Speed
”
Factory setting: 50.0 Hz
9.1.5 Setting in operation 1.02
After installation is completed, only the “ Setting direct ” or “ Setting Step ” setting is visible in the
“
Info
”
menu group. All other menus are protected by a PIN.
Info
Info
Only “ Setting direct ” or “ Setting Step ” is visible.
Setting direct
Setting direct (at Number steps: 0
“
Base setup
”
)
Setting range: Min. Speed - Max. Speed
Factory setting: 50.0 Hz (
Max. Speed)
The value set by the
▼
+
▲
keys is accepted and executed directly ( P key without
function).
Setting Step
Setting step (at Number steps: 1 - 5
“
Base setup
”
)
Setting range: 0 - programmed number steps
Factory setting: 0
When setting a
“
min. speed
”
> OFF the output is not switched o ff in step
“
0
”
!
Operating Instructions Icontrol
–
model series FXDM Programming
L-BAL-E036-GB 2022/47 Index 011 Part.-No.
36/108