Sensor 1
1. Messages with code
|
Msg
|
Message sensor fault for information, for Alarm sensor
deactivated.
External error
2. Alarms with code
|
AL
|
Events during which the device automatically restarts
operation after the cause of the malfunction has been remedied (e.g. mains failure), or
remains in operation (e.g. externally-trunked centralized fault).
Motor fault
3. Error with code
|
Err
|
Events that lead to a disconnection of the controlled output
(e.g. excess motor temperature). Restarting is only possible after a reset (locked).
Motor fault
Controllers period of operation at time of message:
With the
P
key can be switched between description of the
message and the Controllers period of operation at this time.
E.G. on place 3 which is past message
motor fault
.
00009:01:08
11.2
Messages and trouble shooting
A momentary pending alarm or error message is indicated by a blinking indicator and appears
alternately with the standard display.
Operating conditions are indicated by the internal status LED with
fl
ashing code.
internal State LED
11.02.2009
v_flash_explain.VSD
3 x
2 x
ON
OFF
4 x
5 x
6 x
1 x
7 x
8 x
9 x
Display
Code*
LED Code
Relais switches
**
Cause
Reaction of Controller
internal
Opera-
tion
Fault
Adjustment
OFF
Line voltage available?
Unit switch OFF and automati-
cally ON when the voltage has
been restored
1
X
No enable
Switch OFF by external contact
(function
|
1D
|
= enable pro-
grammed for Digital In)
Factory sett.
AL
-
-
-
fault in Eprom
works with defaults
Operating Instructions
Fcontrol
–
model series FKDM..-C
Events / Fault signals
L-BAL-E057-GB 1304 Index 009
Part.-No. 00163327-GB
65/74
