ZIEHL-ABEGG Fcontrol FKDMxx-C Series, Руководство по эксплуатации

Страница: 43 / 74

9.5.10 Data on the total control deviation
The total control deviation is comprised of the sum of the control deviations for performance quantities
and work quantities combined and refers to the speci
fi
ed areas.
In direct reference to the acquired input and controlled variables, the maximum deviation to the target
value is <
±
5 %. By activating the menu-assisted adjustment, the total control deviation can be
reduced to a value of <
±
1 %.
For indirect reference of the acquired input value to the controlled variable, i.e., two physical variables
still need to be converted, the deviation can be reduced to <
±
5 % through adjustment.
In the case of an internal default value through the integrated or external terminal, the control deviation
remains at <
±
0.5%.
9.6 IO Setup
IO Setup
IO Setup
9.6.1 Analog-Output
“ A ”
A Function
The analog outputs 0 - 10 V can be allocated with various functions.
Terminals
“
A
”
-
“
GND
”
= Analog Out (I
max
10 mA)
A min.
With the attitudes
“
A min
”
and
“
A max
”
the characteristic of the output voltage can be
adapted.
Setting range:
“
A min.
”
= 0 - 5 V,
“
A max.
”
= 10 - 5 V
Factory setting:
“
A min.
”
= 0 V,
“
A max.
”
= 10 V
A max.
A Inverting
With the attitudes
“
A Inverting
”
the output voltage can inverted.
Factory setting:
“
A Inverting
”
=
“
OFF
”
Function Description
OFF without function
1A Constant v10 V (factory setting)
2A Proportional the internal control of modulation with consideration
“
Min. speed
”
and
“
Max.
speed
”
setting.
•
for enable
“
OFF
”
it goes back to 0 V
•
for motor fault the output signal remains for a slave controller (
“
Master-Slave
”
combination).
3A proportional input
“
E1
”
4A proportional input
“
E2
”
5A Group control ( Controller Setup - second group)
Operating Instructions Fcontrol
–
model series FKDM..-C Programming
L-BAL-E057-GB 1304 Index 009 Part.-No. 00163327-GB
43/74