9.2
Quickinfo, setpoint, min. and max. compartment temperatures
S:20.0
°
SH:94%
P
↓
↑
▼
+
▲
=
|
Esc
|
Setpoint
Setpoint
Setting range: 0...40
°
C
Factory setting: 20
°
C
E2
E2
When a second sensor (optional) is connected to the input
“
E2
”
measured temper-
ature.
If no sensor is connected the maximum value is displayed. Depending on the device
type
|
81.6
°
C
|
or
|
149.9
|
Temp. min Value
Temp. min. Value
The lowest temperature in the compartment (at input
“
E1
”
) since device reset (mains
supply ON / OFF) or a manual reset with
“
Reset Min-Max
”
Temp. max Value
Temp. max. Value
Maximum temperature in the compartment (at input
“
E1
”
) since device reset (mains
supply ON / OFF) or a manual reset with
“
Reset Min-Max
”
Reset Min-Max
Reset Min-Max
Reset of minimum and maximum values. I.e., the temperature measurement starts
again.
Language
Language
Menu language by the factory set to German.
In this menu different national languages can be selected (GB = English, D = German
...).
PIN
PIN
The presets can be stored and reset using PIN codes (
Menu overview)
PIN 9090
Restore user setting
PIN 9091
To save the basic user settings.
The individually made device con
fi
gurations can be saved here.
With the corresponding PIN input 9090 can be re-established.
PIN 9095
Restore factory setting = delivery status
Version
Version
Displays the software version
00056:46:13
O
= Operation,
T
= Time,
C
= Controller
The time counting runs, as soon as mains voltage is connected (without fault).
If events step on (Motor fault, External Error, etc.), the period of operation is stored at
this time (
Events).
00056:46:13
O
= Operation,
T
= Time,
M
= Motor
The time counting runs as soon as a modulation of the controller is present.
Operating Instructions
Acontrol
–
model series PTE-6AHQ / PTE-10AHQ
Settings for operation
L-BAL-E044-GB 1911 Index 003
Part.-No.
19/36