1.
Press the ON/OFF button
2.
Set the operation mode, circulating
, by pressing the operation mode but-
ton.
3.
Adjust the setting temperature by pressing the temperature setting buttons.
Circulating Operation begins after the room temperature reaches the tem-
perature set by the remote controller.
4.
Adjust the fan speed by pressing the fan speed button. When the MODE is
set at “AUTO”, the fan speed changes automatically.
Cooling/heating/dry operation
1.
Press the ON/OFF button
2.
Set the operation mode to Cooling
, Heating
or Dry
, by pressing the
operation mode button
3.
Adjust the setting temperature by pressing the temperature setting buttons.
4.
Adjust the fan speed by pressing the fan speed button. When the mode is set
at “AUTO” the fan speed changes automatically.
G
WARNING!
• Do not place heating equipment right under the indoor unit and the remote controller.
• Adjust air flow direction to avoid the direct airflow hitting to the heating equipment.
• Provide adequate ventilation
4
10
man_S17xx.qxd 06-02-2008 14:23 Pagina 10
