4
15
Cancelling “OFF Timer”
Press the timer fixing button “OFF”. The timer lamp of the indoor unit goes off.
“SLEEP Timer”
Pressing this button starts the timer mode that will stop the operation after the setting time.
Press the “SLEEP” button during the operation.
The setting time repeats the following mode by pressing the button:
Continuous operation (Sleep Operation: OFF). The operation stops after passing
the setting time.
Sleep Timer features
During Cooling Operation
The setting temperature rises 0.6°C after 30 minutes of Sleep Timer ON, and rises
0.6°C again after 30 minutes of the first temperature rise.
During Heating Operation
The setting temperature drops 0.6°C after 30 minutes of Sleep Timer ON, and
drops 0.6°C again after 30 minutes of the first temperature drop.
Emergency and test operation
Emergency Operation
•
The emergency operation is needed only when the remote control can not be used.
•
When you press the Emergency Operation Switch, you will hear a beep and the emergency operation
starts.
•
Emergency operation is preset for the following two modes, only based on the temperature of the
room at the time of operation.
Temperature
Operation
mode
Designated
temperature
Timer mode
Air flow
Above 23°C
Cooling
26°C
Continuous
Automatic
Below 23°C
Heating
23°C
Continuous
Automatic
G
NOTE
• When you select both “OFF Timer” operation and “Sleep Timer”
operation, the latest setting precedes the first setting.
• “Sleep Timer” operation has no need to set the present time.
man_S17xx.qxd 06-02-2008 14:23 Pagina 15