Zibro Laser FF 95, Руководство по эксплуатации

Страница: 30 / 71

☞
After using the installation template as a guide for the
drilling of the hole for the exhaust pipe, the Laser can
be installed normally, according to the procedure in the
illustration.
If the template is lost or the heater has to be moved,
these are the dimensions and locations of the holes for
the fuel pipe and exhaust pipe.
Do not remove any components from the
heater. Always contact your dealer if repairs
are required.
If the electricity cable is damaged, this may
only be replaced with type H05 VV-F and by
a recognised installer.
Chapter 1, INSTALLATION
31
Laser 95
Fig. 1-3 Template
Back of the heater
Fuel inlet
The center of
the flue pipe
Floor
Fuel inlet
12
3/
8
”
(310 mm)
12
3/
8
”
(310 mm)
3
5/
8
”
(92 mm)
3
5/
8
”
(92 mm)
1 7/
8
” (92 mm)
12
3/
8
”
(310 mm)
12 1/
2
”
(317 mm)