background image

FEATURES ILLUSTRATION

     Valet Switch for 5 seconds, the siren will chirp once to indicate the system is now in programming mode. 
     While the system is in programming mode:
   a.Press the Override/Valet Switch once, the siren will chirp twice and indicate the 0.9-second crank time is 
     selected. In this setting the engine will crank 3 times in total. The first time 0.9 second, the second time 
    1.1 seconds and the third time 1.3 seconds.
  b.Press the Override/Valet Switch once again, the siren will chirp 3 times and indicate the 1.1-second crank 
     time is selected. In this setting the engine will crank 3 times in total. The first time 1.1 seconds, the second 
     time 1.3 seconds and the third time 1.5 seconds.
  c.Follow the above method till the 2.5-second crank time is selected, the siren will chirp 10 times. In this 
     setting the engine will crank 3 times in total. The first time 2.5 seconds, the second time 2.7 seconds and 
     the third time 2.9 seconds.
     After the 2.5-second crank time is selected, if you press the Override/Valet Switch again, the siren will 
     chirp once and return the crank time setting to 0.7 second. (After programming is complete, turn the 
     ignition OFF to exit the programming mode.)

Note:

 Every time when the power supply of the unit is disconnected then connected again, it will return the 

           crank time to the default setting 0.7 second.

9. Short run/turbo 
     

Short run turbo mode keeps the engine running for a programmable period of 1, 2, 3, 4, 5, 6, 7 or 8 minutes 

     after you turn off the ignition key and lock the doors. This will protect the engine of the vehicles equipped 
     with Turbo engine. (Only system with remote engine start has this function.)
     In default setting, the system will keep the engine running for 2 minutes after turning off the ignition key. 
     If the brake pedal is pressed within 2 minutes then the engine will shut down instantly. If the brake pedal 
     is being pressed when turning off the ignition key, the engine will shut down instantly. This will be helpful 
     when parking a manual-transmission vehicle on a slope.

-11-

Содержание SM-800D



























Отзывы: