FEATURES ILLUSTRATION
Picture (4): Shock sensor
temporarily turned off
Picture (5): Remote engine start
6. System's Status Check
By pressing button , you can check whether your Remote Control is within the range of transmission or
not. If within the range, the Remote Control will beep 3 times. If you are out of range, the Remote Control
will not emit any sound.
7. Remote Sensor Bypass
Remote sensor bypass is designed for situation in which it is not convenient for the sensor to be active due
to environmental conditions that may cause annoying false alarms (i.e.: the vehicle is parked at the airport
or in thunderstorm day). In such occasions you may turn off the sensor temporarily.W
hileth e a larm is ar med,
for system with remote engine start, press button & once (for system
without remote engine start, press button twice), the turn signal lights will
flash once, the Remote Control will beep once, the sensor of the alarm system
and the driver paging function are temporarily turned off. After pressing button
to disarm the alarm, the system will return to the shock-sensing mode
again the next time when you arm the alarm. The LCD screen on the Remote
Control displays as picture (4).
8. Remote Engine Start (Optional)
-9-
A. While the alarm is armed, press button twice, the siren will chirp
once, the turn signal lights will flash once, the Remote Control will beep
3 times and the engine will start. After the engine is started the Remote
Control will beep 3 times again, the turn signal lights will flash once every
two seconds. The LCD screen on the Remote Control displays as picture (5).
B. Once the vehicle has started, it will run for the pre-programmed period
