TIPS FOR TROUBLE SHOOTING
SOLUTION
1.Check whether the plug is inserted in opposite side.
2.Check whether the wire connections are correct.
3.Check whether the fuse is burnt.
PROBLEM
1.Check whether there is improper wiring connection,
especially the connection of the dome light near the
door at the side of the brake light.
2.Any door or PIN SW. is not closed completely.
After installation of the main control module,
the siren sounds continuously and cannot be
stopped by remote control.
While the armed vehicle is parked on the
roadside, the alarm will sound every time
when a big or heavy vehicle is passing.
1.Check whether the sensitivity is too high.
2.Reduce the sensitivity.
When the alarm system is triggered, the siren
will not sound.
1.Check whether the alarm is in silent armed state.
2.Check whether there is a problem with the siren.
3.Check the connection between the siren and the main
control module.
10 seconds after arming the alarm, the siren
will sound indefinitely. Disarm the alarm then
arm it again, the same case will happen again.
-24-
