19
!!! Words of Caution !!!
The manufacturer and distributor assume no responsibility for uses of this device
other than those described in the operating instructions. The manufacturer and
distributor assume no liability for any alteration of the device mechanically or
electrically.
HIGH TEMPERATURES, The unit can reach temperatures that are over 400 C ( 752
F) which can cause serious burns and can cause materials to combust. Be certain
to comply with the following precautions:
Do not touch any of the metal surfaces near the tip/nozzle.
Do not use the unit near flammable items.
Advise other people in your work area about the temperatures and dangers
related to the unit.
Turn off the switch on the unit when it is not in use or being monitored by
qualified personnel.
Except for Tip Cleaning always turn off the unit, unplug it and allow it to
cool to room temperature prior to performing any maintenance.
Tip temperature may exceed the flash point of some materials so be aware
of adjacent materials in your work area.
Place the gun in its stand when not in use. Do not lay it on the bench or
place it near items that may melt or combust.
Do not place the tip on any spot for an extended period of time.
Do not use in an explosive atmosphere.
Be aware heat can be transferred along adjacent metal and to combustible
material that may be out of sight.
OTHER RECOMMENDATIONS:
Do not use this device for purposes for which it was not designed or
intended.
Do not try to dislodge debris or clogs by striking the gun or tapping it on a
hard surface.
Do not file the soldering tip to remove scale. Use the wet sponge to clean
the tip.
