background image

2

February 2002

3920-A2-GK47-10

This document is intended to be used in conjunction with the COMSPHERE 392xPlus Modems, Models 3920Plus
and 3921Plus, Technical Reference Manual
, Document No. 3920-A2-GH30. This manual is available online at
www.paradyne.com. Select Library -> Technical Manuals -> Business Class Analog Modems.

Ordering Information

Call your sales representative to order additional product documentation or to verify the correct model number for
your geographic area.

COMSPHERE 3920Plus Modem

The Model 3920Plus singleport modem is a standalone modem (Figure 1) capable of either 4-wire/2-wire
leased-line or dial operation. This modem is controlled using either AT commands or the DCP. The DCP consists
of a liquid crystal display (LCD), three function keys, four directional keys, and a row of 13 LED status
indicators. For a better understanding of DCP operation, refer to Chapter 3, DCP Operation, in the Technical
Reference Manual
.

DIAGNOSTIC

CONTROL

PANEL

LCD AND

KEYPAD

STATUS

INDICATORS

POWER

SUPPLY

97-14678-02

POWER
ON/OFF

LEASED

DIAL

DTE 1

NMS

POWER IN

Figure 1. Model 3920Plus Modem (North America Model) 

Содержание 3920Plus















Отзывы: