Zhiyun WEEBILL-S, Руководство пользователя

Страница: 12 / 34

8
Installation and Balance Adjustment
• Make the lens face up, slightly loosen the thumb screw of the tilt axis, and push the
camera to move upward or downward until the camera can stay still with the lens
facing up (i.e.the camera stays still and vertical to the ground as shown below).
Complete this step by tightening up the thumb screw.
• Unlock the roll axis, and the roll axis latch under the quick release plate, push the
camera to move left or right until the camera can stay still and horizontal to the
ground (as shown below). Complete this step by tightening up Roll Axis Lock Latch.
• Unlock the tilt axis and Quick Release Plate Latch, push the camera to move forward
or backward until the camera can stay still and almost level with its lens facing front
(as shown below). Complete this step by tightening up Quick Release Plate Latch.
• Unlock the pan axis, slightly loosen the thumb screw on it, then adjust the pan axis
until it stays still and horizontal to the ground (as shown below). Complete this step
by tightening up thumb screw.