Zhiyun CRANE-M 3S, Руководство пользователя

Страница: 33 / 46

29
Firmware Upgrade & Calibration
Circumstances When Calibration Is Needed
Calibration Reason Calibration
Method
1. Slight deviation is found in the level position after the
initialization of the gimbal.
2. The gimbal has not been used for a long time.
3. The gimbal undergoes significant temperature differences in
operation environments.
Six-side
Calibration
Slight deviation is found in the tilt or roll angle in level
position after six-side calibration of the gimbal.
Motor fine-
tuning
Calibrate the gimbal as needed.
Six-side Calibration
1. Six-side calibration via APP：
According to the method introduced in "How to Use the App", please connect the
gimbal to the APP, and enter "Settings"- "Six-side Calibration", then conduct the
six-side calibration according to the prompt.
2. Six-side calibration via "Zhiyun Gimbal Tools":
Power on the gimbal and enter standby mode. Connect the charging/upgrade
port of the gimbal to the computer with the Type-C USB cable, Open "Zhiyun
Gimbal Tools", click "open" on the top and click "calibration" on the bottom.
Please conduct the process according to the following steps. A "
√ " mark will
appear after the calibration is completed.
① Please refer to the six-side calibration steps below. After the calibration is
completed, please restart the gimbal.
② In simple terms, six-side calibration is to place all six sides of the quick
release plate vertically to a level surface respectively.