132 of 180
MAINTENANCE AND USE MANUAL
SQM25 N - SQM25 SN - SAB1000G
EN
7.6
RESIDUAL RISK
Residual risk is:
• a danger that cannot be completely eliminated through design and application of safety devices.
• a potential danger which cannot be highlighted.
The model trimmer generates dust as it works; hence the work itself involves the following
residual risks:
• being hit by jets of dust generated during work;
• work carried out on the machine interior by unauthorised personnel;
• risk of damaging your hands.
To prevent accidents always observe the instructions in this manual. Should
you have any doubts at all please contact the Manufacturer or your Authorised
Servicing Centre.
Always wear protective goggles when using the machine.
7.5
DISC REPLACEMENT
When it is necessary to change the disc the
SQM 25 N
and
SQM 25 SN
model trimmers are
easily disassembled.
To change a disc (see figure) proceed as follows:
•
undo the four lock knobs (
1
);
• remove the front cover;
• unscrew the disc fixing screw (
X
);
• replace the worn disc (
8 or 13
) with one of the same specifications.
X
8
13
1
1
It is advisable to change the
SQM 25 N
abrasive disc every 12 months.
