126 of 180
MAINTENANCE AND USE MANUAL
SQM25 N - SQM25 SN - SAB1000G
EN
6.5
STARTING UP THE
SQM 25 N
Figure
1
Fig. 1 :
Position the machine correctly in the
designated area, observing the instructions in
section 6.3.1.
9
10
Figure
2
Fig. 2 :
Connect the water inlet hose (
10
) to the
connector on the rear of the model trimmer (
9
); insert
the relative gaskets at the hose connection point
(
10
).
Then connect the other end of the water feed hose
(
10
) to a tap.
11
Figure
3
Fig. 3 :
Connect the water discharge hose to the
connector (
11
) on the right-hand side of the machine.
To ensure proper operation it is good practice to
place the other end of the hose in a sink/basin or
other recipient suitable for collection of the plaster
residues.
7
Figure
4
Fig. 4 :
Insert the power lead plug (
7
) into a mains
socket, observing the instructions in section 6.4.
Failure to observe any of the above machine installation instructions may lead
to malfunctions and render the warranty null and void.
