125 of 180
MAINTENANCE AND USE MANUAL
SQM25 N - SQM25 SN - SAB1000G
EN
6.3.1
Worktops
The machine (in the illustration an
SQM S25 SN
) has been designed to operate resting and/or
fixed on a rigid, flat, level worktop.
Workshop furniture or modelling benches may be used for this purpose (with the former the
worker is in a standing position and with the latter in a sitting position); check their stability
beforehand. The
SAB 1000 G
aspirator has been designed for direct on-floor placement.
6.4
CONNECTING UP TO THE POWER SUPPLY
The user must provide a power connection with relative socket near the machine installation
point. The user must also install an adequate electrical circuit breaker upstream from the socket
as well as efficacious overload/indirect contact safety devices.
Connection is effected via the safety plug (16A, in compliance with European standards) at the
end of the power lead: this must be inserted in the mains socket.
When connecting check:
• that mains voltage and frequency are as indicated on the identification plate (incorrect power
supply voltage may damage the machine);
• that the mains supply has a proper, efficient earth connection.
It is forbidden to tamper with the power lead and its plug. When replacing them
owing to damage and/or wear please contact an Authorised Service Centre.
A proper earth connection is compulsory. Should it temporarily be
necessary to use an extension lead the latter must comply with the
standards in force in the country of use.
