K207A Swing Gate Opener User’s Manual
If the maximum angle for installing is 105
°
, the retainer should be installed on the ground at approx.
100
°
. If the installing angle is 90
°
, the retainer should be installed at 90
°
. See Fig. 3.
Electric Lock
If the gate section is >5 feet (1.5 meters), it is recommended that you install the electric lock. Weld
the steel plate of the lock to the gate, and then fix the lock. See Fig. 11 to determine the height of the
plate.
Fig. 11
A
Release here
Electric lock
Base plate
To install the base plate of the lock, fix the plate to the ground with 3 screws and make sure that the
lock pin can fit tightly in the hole in the plate.
Adjustment
The pair of gate sections will not start simultaneously. The gate section with the lock will start to
open earlier than the other gate section, so that both sections can be locked properly. A plate or tab
