K207A Swing Gate Opener User’s Manual
Important safety information
Read the entire user’s manual before beginning installation, and carefully obey the
following instructions:
z
To prevent the risk of electrocution, be sure to turn off all power to the K207A until
installation is complete.
z
The Gate Opener should be installed by a qualified technician. Otherwise, serious
personal injury or property damage may occur.
z
Before installation, all the locks of the gate should be unlocked.
z
The auto-reverse function must be checked during installation to ensure that the gate
can auto-reverse in the event of obstruction.
z
This auto-reverse function should be regularly inspected and adjusted, if necessary.
z
When opening or closing the gate, do not attempt to walk or drive through the gate.
Do not touch the gate while in operation.
z
Children should not be allowed to play near or operate automatic gates.
z
The maximum force that the gate opener can provide is 1500N.
z
An electric lock is provided for installation for gate lengths greater than 5 feet (1.5
meters).
z
This unit uses a current feedback system to stop. Do not operate the opener without a
solid stop block in place. This could cause injury, damage to the opener or other
personal property.
z
Do not install the gate too close to the limit of travel; install the stop block with at least
three inches margin.
z
The automatic gate opener must be grounded.
z
Be careful when in close proximity to moving parts where hands or fingers could be
pinched.
z
Do not allow control devices to be placed so that a person can access them by
reaching through the gate.
z
In the event of power failure, an emergency release key allows you to operate the
gate manually.
z
The opener should be switched off before repairing it or opening its cover.
z
Please erase and reset the code after installing the opener.
