24
3.Alarm connection operation
·Connect the alarm input according to the device connection and the instructions
·Connect the related alarm output of DVR to associated alarm device (Example: light
、
beeper, etc.)
·Made the related setting in the menu
,
See details at Menu>Setting>Alarm setting
4.Pan-tilt-zoom control operation
·Confirm the proper connection of PTZ and Communication Protocol. Set the Camera address
·Confirm the proper connection between the PTA and the A
、
B lines of DVR’s RS485 port.
·Set the related items in the menu
,
See details at Menu>System setting>Control
·Select full screen call-up of associated PTZ Camera
·Press “Assistant” on the remote controller or “Fn1” on the front panel to shift the items on the screen
·Use direction key to move and control the selections on the screen
5.Network connection operation
·Confirm the correct network connection between DVR and computer
·Set the IP address, subnet mask and gateway of the computer and DVR separately
(
If there is no router in the
network only the IP address is needed, if there is routers in the network, please set the related gateway and subnet
mask
)
·Open IE browser and input the IP address of the DVR you want to log in
·Network operation see details at
Chapter 5