21
Chapter 3 Operating Instructions
1.
Turn on / off the recorder
1.1 Turn on the recorder
Plug in the power cable; switch on the power button at the back of the recorder; power indicator light on; DVR
on; default single window for the video output display; press Enter the Log-in screen appears on Monitor; If the
starting time is within the programmed recording time, the system will start recording function automatically.
Channel indicator lights on and system work in a normal manner.
Note
: if the system stops during HDD Boot detection, the HDD may not be installed right and please check the HDD
connections (Ribbon and Power Connections).
1.2 Enter the setting menu
Before entering the menu, the user must input the password. There are two levels of password—User password
and Administrator password.
User password
666666
Administrator password 888888
With user password, you are also not allowed to enter system setting and admin setting.
Note:
For the consideration of security, please change the setting in admin setting refer to
Chapter 4
——
Menu
operation.
1.3 Turn off the recorder *Please unplug the 220VAC power supply during HDD installation*
Press the POWER key on the front panel for 4 seconds to stop the current operations. Then switch off the
power button at the back panel of the DVR to turn off the power.
1.4 Power off recovery
When the power is cut off abnormally, the recorder will recall its last state and continue where it left off. The
state indicator light is the same as it was before the power off.
1.5 Change the battery of the DVR
Change the battery of the DVR, recommend to the same type of Lithium fastener batteries
Note:
Please check the system time in time and generally change the battery each year to ensure the veracity time.
