35
Image
In CH option select the related channel.QUALITY you can shift
6levels circularly, in which the 6
th
level is the best quality. Framerate
1f/s-25f/s are selectable. BITRATE there are CBR(audio/video) and
VBR(audio/video).VIDEOLOST :select port 1-6for alarm output,
prompting to select OFF means non-alarm output when video lost,
meanwhile the prompt ON/OFF for the outside equip(port1-6) of alarm
relay port means if pop-up alarm information or not. Select SAVE when
finish the setting ,ESC for exit current setting. If you want to resume to
the default, move the cursor to select DEFAULT and then select SAVE.
Alarm
Select the relevant channel in CH(this recorder has 16-Ch alarm
input).TYPE has normal on/normal close
(
electric output method
)
.No.
If the number in RECORD is selected, recording would be started
automatically when there is alarm input. If the alarm output port is
chosen, it will trigger corresponding equipment when there is alarm
input.CH7 is 12Vcontrollable output. DELAY means to lengthen the
recording time after receiving alarm signals
(
1/6
、
1/2
、
1
、
3
……
30min
)
.
When the outside alarm is canceled, the system will lengthen the
recording time automatically before closing alarm and relay output.
When Time 1
、
Time 2 are open, within the time of the setting the
recording will be triggered by alarm signals. The beginning time should
be earlier than the ending time; the setting in Time 2 should be later than
the setting in Time 1. PRE-RECORD: Save the monitoring image for
sometime before alarming. TIP: ON/OFF alarm prompt.
PTZ control
Select the corresponding channel in CH, and choose the
protocol of the brand name of corresponding pan-tilt decoder in
PROTOCOL. ADDRESS is the address of the corresponding platform
decoder DATABIT: selection4-8; STOP BIT: selection 1, 1.5, 2;
VERIFY: odd, even and null
IMAGE SETTING
CH 0
1
NAME
CHANNEL 01
QUALITY 0
6
FRAMERATE
25F/S
BITRATE VBR
VIDEO LOSS ALARM SHUT ALARM
ALARM TIP NO TIP
COVER SET OFF
DEFAULT
SAVE
CANCEL
ALARM SETTING
CH 0
1
TYPE NORAML OPEN
No 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
OUTPUT
●○○○○○○○○○○○○○○
RECORD
●○○○○○○○○○○○○○○
TIME1 00
:
00
-
24
:
00 ON
TIME2 00
:
00
-
24
:
00 OFF
PRE-RECORD
OFF
DELAY 30S
TIP OFF
DEFAULT
SAVE
CANCEL
PTZ CONTROL
CH
1
PROTOCOL
NONE
ADDRESS
008
BAUDRATE
4800
DATA BIT 8 BIT
STOP BIT 1 BIT
VERIFY NULL
DEFAULT SAVE CANCEL