Page 11
• “Left” and “Right” Push Buttons
Pressing and
holding
the “Left” and “Right” Push Buttons
at the same time
has the following
functions:
• Activates Set Up Mode as indicated by the blinking Display LED. (Operator must hold the
buttons down until the blinking begins, then release.)
• While in Set Up Mode, deactivates Set Up Mode, saves the displayed Value to memory,
and returns to the Function Menu. (Operator must
hold
the buttons down until the blinking
stops, then
release
.)
• “Left “Push Button Only
Pressing the “Left” Push Button
once
has the following functions:
• Deactivates Set Up Mode WITHOUT any changes to the Function Value stored in memory.
(Operator must
hold
the button down until function code stops blinking, then
release
.) The
previously saved Function Value will then be displayed.
Figure ENG-283-8: Error Menu Example
• While in Function Menu, changes the Display LED to the Error Menu, if any errors are
present. (has no effect if there are no errors stored)
• While in the Error Menu, changes the Display LED back to the Function Menu.
• “Right” Push Button Only
Pressing the “Right” Push Button
once
has the following function:
• While in the Error Menu, clears inactive errors. (Active errors blink, inactive do not)
Pressing and
holding
the “Right” Push Button has the following function:
Figure ENG-283-9: Display LED Four Digit Value
• While in Set Up Mode, or Function Menu, allows the Function Value of the current
Function Code to be displayed with all four Display LEDs.
9
Activating Set Up Mode and Storing a Value
NOTE: To escape from the set up procedure at any time without saving the changed value. Depress the
LEFT Arrow Push Button. The Function Code will stop flashing and the Function will be saved with the
original value.
Depress
and
Hold
Throttle Maximum
Function Code and Default Value
Blinking
15340_ART
