9
Installing or Changing the Device
Battery
FIGURE 2: BATTERY REPlACEMENT
Install or change the battery in this device by slid-
ing the battery compartment cover, located at the
back of the device, to the right. Insert a CR2032
battery in the battery compartment with the posi-
tive (+) polarity facing up (See Figure 2). To check
that the battery has been fitted correctly press the
ON/UP button once and the led will glow green.
Hence press the OFF/DOWN button to switch-off
the device. Replace the battery compartment cov-
er.
Connecting the Device and Electrode
Pad
Place the electrode with the contact plugs facing
upward on a flat surface. Place the TENS device
with the contact jacks facing down onto the elec-
trode pad so that plugs and jacks are aligned.
Then press down the device until it is securely
connected to the electrode pad.
Do not remove the plastic film from the electrode
pad until ready to place it on the skin.
Содержание SpaBuddy Mini Go
Страница 17: ...17 Placement of Electrode ...