10
Electrode Pad Skin Placement
Ensure the skin is clean and dry before placing
the electrode pad. Remove the plastic film from
the electrode pad by holding the edge of electrode
and peeling it away from the plastic. Place elec-
trode pad on the selected skin and smooth it down
with firm pressure.
Do not discard the electrode’s plastic film as it will
be required to store the electrode pad at the com-
pletion of the treatment.
Device Operation
Switch the device on by pressing the ON/+ button
and the function display light will illuminate. By
pressing the On/+ button again, the device begins
treatment at its lowest intensity level. The device
has 10 intensity levels to allow the selection of
appropriate treatment strength. Select the desired
intensity level by pressing the On/+ button the re-
quired number of times.
This device will automatically stop and switch off
after 20 minutes of treatment.
Treatment may be discontinued at any time by
pressing -/OFF button repeatedly (depending on
the level of intensity selected) until the function
display light turns off.
Содержание SpaBuddy Mini Go
Страница 17: ...17 Placement of Electrode ...