Zeversolar Eversol-TLC 10K, Инструкция по установке и эксплуатации

Страница: 10 / 137

Installation and operating instructions 9
2.4 Symbols on the type label
Icon Explanation
Beware of high voltage and operating current.
The inverter operates at high voltage and current. Work on the inverter
may only be carried out by skilled and authorized electricians.
Beware of hot surfaces.
The inverter can become hot during operation. Avoid contact with it during
operation.
Do not dispose of this inverter with household waste.
For more information on disposal, please see chapter 13 “Recycling and
disposal”.
CE mark.
The inverter complies with the requirements of the applicable CE
guideline.
Certified safety
The product is TUV-tested and complies with the requirements of the
German Equipment and Product Safety Act..
RCM
The product complies with the requirements of the applicable Australian
low voltage and electromagnetic compatibility standards.
Capacitor discharge
Before opening the covers, the inverter must be disconnected from the
grid and PV generator. Wait at least five minutes to allow the energy
storage capacitors to fully discharge.
Refer to the manual accompanying the inverter.
Risk of danger, warning and caution
Safety information important for human safety. Failure to observe the
safety information in this manual may result in injury or death.