Zeus MST-8000+, Инструкция по эксплуатации

Страница: 6 / 10

Zeus Technology Co., Ltd. Shenzhen
6
If the test result lower right corner of the interface with an icon of the printer,
press <Enter> key to print the test results, you can enter the test results before
printing models, the interface shown in Figure 3.1.5. Enter up to 16.
"▲ ▼" to select the character you want to enter. (You can enter letters, numbers,
there is a small part of the sign)
"
◀ ▶
" Select the digits to enter
When you're finished, press <Enter> to save the print, <Esc> key does not save
print. 3.1.6 print result shown in Fig.
Note:
1, before the test, ensure that the engine does not start, all electronic devices have
been turned off.
2, after the car running for some time, not immediately tested, because the
battery voltage is slightly higher than normal available, open headlights, etc. 2 to
3 minutes, before they can properly test.
图 3.1.3 图
3.1.4
图
3.1.5
图
3.1.6