Zeus MST-8000+, Инструкция по эксплуатации

Страница: 4 / 10

Zeus Technology Co., Ltd. Shenzhen
4
2.The boot
1. connecting wiring and battery battery tester between. Red clip connect the
battery positive, black clip connect the battery negative. If red or black clip
clip connection is not reliable, the following diagram interface 1.0 and Figure
1.1 shows, there is a problem at this time need to disconnect to reconnect to
clip.
2.wiring to normal after device initialization is successful, the
display will automatically boot interface (as shown below), press any
key to continue.
图
2.0
图 2.1
图
2.2