Zetronix zHunter-500HD, Руководство пользователя

Страница: 4 / 19

1.2 Introduction of Function
2.0C Series adapts IR thermo stimulation technology. Camera will automatically photograph or
shoot videos when triggered by moving object. The upgraded 2.0CM can transmit the images to
users corresponding to the set phone and computers via GPRS.
This product is mainly used in housing security, monitoring wild animals, and tracking. Camera is
under energy saving mode while nothing is detected in the reachable monitoring zone. With 8 AA
alkaline batteries, the longest standby time could be around 6 months. (Time to initiate is
approximately 1sec).
This product has been equipped supplementary IR LED lights and specialized CMOS photosensitive
chip which can automatically power on IR LED lights during dark night to capture clear black-and-
white photos or videos; when the light is bright enough, the IR LED will be off and camera will
capture colorful photos or videos.
With the high-qualified waterproof shell, this product can be set at wild fields. Please set it 2M high
above the ground, avoid the cloud thunder whether, avoid high temperature air vent, and do not
bring it to dive.
1.3 Application
2.0C Series is an ideal product for housing security, warehouse surveillance, and monitoring wild
animals with its camouflage appearance and nice shape. It is convenient to install or fasten, could
be used to take photographs manually and carry on long-time videos in Test mode.
a. Instant surveillance camera for home, office, construction site, and warehouse, etc.;
b. Motion-triggered infra-red night vision surveillance;
c. Animal oberservation and hunting;
1.4 Attention:
1. Insert the SD memory card correctly, camera does not support SD card hot swap (insertion).
2. Please use AA battery with good quality in order to prevent battery cells from corrosion of leaked
acid.
3. Use right adaptor (6V/1A or 2A) of this camera to supply power, and do not invert the electrode
when put in batteries.
4. In Test mode, camera will automatically power off in 1min without any operations . Please
manually turn ON it as if you want to use it again.
5. Don’t interrupt power supply during system upgrade, please deliver it back to factory if the device
doesn’t work after upgrading.
6. Do not frequently insert or pull out SD card and battery or plug in and out the adaptor when the
camera is on.
7. Do not have any floating objects, such as leaves, strings, or ribbons in the 3M motion detection
zone of cameras, to avoid mistaking photograph or videos.
8. Do not keep camera next to hot irrelevant objects, air conditioner exhaust vents, and light, etc. to
avoid mistaking photos or videos.
- 2 -