ZETRON 748, Техническое руководство

Страница: 112 / 259

Feature Set Reference
98 025-9368H
INTERCONNECT FUNCTIONS
Access ANI
Before a user (radio) may sign on using a mobile or portable, an Access ANI (Automatic Number
Identification) code must be assigned to the user. This code provides access to the interconnect.
Without it, a user cannot make or receive calls. The Model 748 supports two types of
Access ANIs ,
Short sign-on (single digit ANI) and ANI sign-on (multi-digit ANI). ANIs can be random in length
up to 10 digits, using any of the 16 DTMF tone pairs (0 to 9, A to D, *, #).
Wild ANI is supported in the Roamer version of the Model 748. It is indicated in the database by the
presence of the DTMF fourth column “A” character. Wild ANI must also be enabled in the Mobile
System menu.
Multi-digit ANIs are checked for conflicts and are considered unique. Short sign-on or single digit
ANIs are not checked for conflicts. Conflicts between multi-digit ANIs and short sign-on are not
checked for. An ANI conflict is when one ANI can be mistaken for another. This is typically when
one ANI is a sub-set of another beginning with the first digit. Please see “How to Program ANIs in
the Model 748” in Section 4.
How to program it:
Access the Model 748 through your direct connected PC or terminal, or remotely from your PC
connected to a modem via the Model 748's internal modem.
Once connected to the Model 748 and the Main Menu is on the screen, type “1” and press ENTER ,
and the Interconnect Menu will appear. Type “3” and press
ENTER
, the Interconnect User Menu
will be displayed using the currently selected user's data. Select the User number you wish to
program (see “User Range” later in this section). Select the item number for
Access ANI followed by
ENTER
. The current Access ANI will appear along with a message instructing you to enter the new
Access ANI code. Type in the new Access ANI and press
ENTER
when you have finished.
If a conflict is found with another Access ANI or Program Access code, an error message will be
displayed and the ANI returned to default.
The default Access ANI is “*”. To clear a user's ANI, press the space bar followed by pressing
ENTER . This will clear the current ANI and set it to “*”.
When a short sign-on is programmed (single digit ANI), other parameters are defaulted. All calling
privileges are disabled except Mobile-to-phone, Phone-to-mobile.
Access ANI is not supported by block or range programming. To help verify ANIs, a method of
searching for an
Access ANI can be performed from User range . See “User Range” later in this
section or “Convenience Features” in Section 4.